New Features

ARCHLine.XP 2018 New features 12 ARCHLine.XP ® 2.2.3. Properties of lighting 3D text 2.2.3.1. Materials and lighting parameters On the "Materials and Lighting" tab, you can specify the brightness and colour of luminous text and turn it on / off them. Enable light Activate the "Enable light" option to turn the luminous text on. Lighting is enabled on the front only The light of the luminous text is only applied onto the front surface, the body part of the text does not emit light. Light intensity per meter Select from the predefined values or type any value to set dimming of level. Dimming level You can specify the value for modifying the dimming level. 100% means that it adjusts the same dimming level as the original dimming level, while providing a different value to reduce or increase the original dimming level. Select from the predefined values or type any value to set dimming level of luminous text. Light colour You can choose any colours for the luminous text. Click the button and choose a colour from the displayed colour palette. Material of light Three materials can be assigned to the text, the material of the body and the material of the front and back surface. These are visible when the luminous text is turned off. 2.2.3.2. Text parameters You can edit the text of the luminous text and the text properties on this panel. The latter is visible when the LED strip is off. Extrusion height You can set the thickness of the luminous text here. Text height You can set the text size of the luminous text. Text style You can set the text style of the luminous text here. 2.2.3.3. General settings You can check and modify the relative height and the representation in 2D of the luminous text.